First Coast Ramps — Ramp Calculator & Cut List

How this works — design your ramp in 3 steps

Pick a style above — Quarter Pipe, Basic (a symmetric mini ramp), or Custom (start from a Basic ramp, then add a taller section or a roll-in).
Enter your sizes in feet. The drawing, dimensions, and materials cut list all update as you type. Drag the drawing to spin it in 3D, or switch to Side view.
Click “Get a quote for this build” and your exact ramp comes with your request — we reply with one fixed, all-in price (ramp, Gator Skins surface, site prep, delivery & install).

Not sure on sizes? Get in the ballpark and tell us in the quote — we’ll dial it in. Prefer to talk? Call or text (904) 801-9919.

Dimensions

Quarter pipe

Sizes in feet. 3.5 ft = 3' 6".

Height (ft)

Radius (ft)

Width (ft)

Deck depth (ft)

Base ramp

Symmetric mini / half-pipe. Radius & flat auto-calculate from height + feel — shown in the specs.

Height (ft)

Transition feel

Width (ft)

Deck depth (ft)

Taller section

Only the height differs from the base ramp.

Place on

Height (ft)

Roll-in section

Same transition as the base ramp, just no coping — roll over the top, no drop-in.

Place on

Build settings

Rib spacing (o.c.)

Structural ply

Surface layers

Shop drawing

Drag the drawing to spin it in 3D.

Cut list — estimate, add ~10% waste

Item	Spec	Qty

Copied ✓

Custom Ramp Builder starts from your Basic ramp (its dimensions show here struck-through for reference) and only offers what varies: a taller section (height only) and a roll-in (no coping). The front and back decks are each aligned to a flush plane across all sections for a fluid (non-choppy) look; standard back decking 3–4 ft. Counts are estimates — add ~10% waste.